New Safety Operation Regulations for Metal Band Sawing Machines

Release time:

2014-03-03

Jiangsu Li Chi CNC Machine Tool Manufacturing Co., Ltd. is a professional manufacturer of sawing machines. If you want to use the band sawing machine is reasonable and standardized, it is safe to use and has a longer service life. We have to comply with its safety operation procedures, the following to share the metal band sawing machine safety operation procedures, hoping to give you a little help and advice: 1, band sawing machine operation and maintenance personnel, must undergo professional training, master band sawing machine operation and maintenance skills. Operators should ensure that they are focused. 2. When shifting, you must stop before opening the protective cover, turn the handle to loosen the belt, place the V-belt in the groove of the required speed, then tighten the belt and cover the protective cover. 3. The adjustment of the chip removal wire brush should make the wire contact the teeth of the band saw blade, but do not exceed the root of the teeth. Pay attention to observe whether the wire brush can remove iron filings. 4. Adjust the guide arm according to the size of the workpiece, and lock the guide device after adjustment. 5. The maximum diameter of the sawing material shall not exceed the regulations, and the workpiece must be clamped firmly. 6, band saw blade tightness should be appropriate, speed and feed must be appropriate. 7. The saw blade is broken during cutting. After replacing the new saw blade, the workpiece must be turned over and sawed again. The saw machine should be put down slowly and should not be impacted. 8. The operator is strictly prohibited to leave the post during the cutting process, and it is strictly prohibited to operate with gloves. 9. When each shift comes off work, the power supply must be cut off, the protective cover must be opened, the chips brought into the saw wheel must be removed, and the daily maintenance and surrounding cleaning work must be done well.

1, band sawing machine operation and maintenance personnel, must undergo professional training, master band sawing machine operation and maintenance skills. Operators should ensure that they are focused.

2. When shifting, you must stop before opening the protective cover, turn the handle to loosen the belt, place the V-belt in the groove of the required speed, then tighten the belt and cover the protective cover.

3. The adjustment of the chip removal wire brush should make the wire contact the teeth of the band saw blade, but do not exceed the root of the teeth. Pay attention to observe whether the wire brush can remove iron filings.

4. Adjust the guide arm according to the size of the workpiece, and lock the guide device after adjustment.

5. The maximum diameter of the sawing material shall not exceed the regulations, and the workpiece must be clamped firmly.

6, band saw blade tightness should be appropriate, speed and feed must be appropriate.

7. The saw blade is broken during cutting. After replacing the new saw blade, the workpiece must be turned over and sawed again. The saw machine should be put down slowly and should not be impacted.

8. The operator is strictly prohibited to leave the post during the cutting process, and it is strictly prohibited to operate with gloves.

9. When each shift comes off work, the power supply must be cut off, the protective cover must be opened, the chips brought into the saw wheel must be removed, and the daily maintenance and surrounding cleaning work must be done well.

Blog

New Safety Operation Regulations for Metal Band Sawing Machines