Some common sense of band sawing machine, special band sawing machine manufacturers on the construction site to solve your doubts

Special band sawing machine on construction siteThe manufacturer thinksWithband sawing machineWidely used in the field of metal cutting, high-speed processing technology is developing rapidly. How to make full use of the superior performance of the metal band saw and maintain the accuracy of the band saw is very important. Now let's talk about some details and common sense that metal band saw should pay attention to in terms of power supply. Hope to help everyone.

Special band sawing machine on construction siteThe manufacturer thinksThe power supply is the energy support part to maintain the normal operation of the system. The direct result of failure or failure is the shutdown or destruction of the whole system of the sawing machine. At the same time, dueBeltThe sawing machine system uses three-phase AC380V power supply, safety is alsoband sawing machineAn important part of the preliminary work of the equipment. Based on the above reasons,band sawing machineThe power supply used by the equipment has the following requirements:

　　First of all, the grid voltage fluctuation should be controlledBetween 10%-15%. Special band sawing machine on construction siteThe manufacturer thinksIn China, the power supply fluctuates greatly, the quality is poor, and the interference such as high-frequency pulse is hidden. In addition, human factors(such as sudden power failure, etc.) It often leads to more deviations, even as high as 20%, during peak hours, such as about an hour before going to work or leaving work during the day and at night. Make the machine alarm, can not work normally, damage the band saw power supply system. It even leads to the loss of relevant parameter data. It is recommended that the workshop where the metal band sawing machine is concentrated should be equipped with an AC regulated power supply system with automatic compensation and adjustment functions.

Secondly, recommendationsBeltThe electrical equipment of the sawing machine is connected to a single power supply. Special band sawing machine on construction siteThe manufacturer thinksIf some parts of the electrical equipment(e. g. electronic circuits and electromagnetic clutches) require other power supplies, which should be derived as much as possible from devices that are part of the mechanical electrical equipment (such as transformers and frequency converters). For large and complex machines, including many machines that work together in a collaborative manner and take up a lot of space, more than one attractive power supply may be required, depending on the configuration of the field power supply.

Unless the electromechanical equipment passes through the plug/The socket is directly connected to the power supply, otherwise it is recommended to connect the power cord directly to the power terminal of the power-off switch. If this is not possible, a separate terminal block should be provided for the power cord.

The handle of the power cut-off switch should be easily accessible and should be installed above an easy-to-operate position0.6M1.9M. The upper limit is recommended to be 1.7M, which can quickly cut off the power supply in an emergency to reduce losses and casualties.

　　Third,Requirements of sawing machine system for compressed air supply system. Special band sawing machine on construction siteManufacturers believe that band sawing machineMany pneumatic components are generally used, so the workshop should be connected to a clean and dry compressed air supply system network. Flow and pressure shall meet the requirements. The compressed air machine should be installed away from the CNC machine tool, includingband sawing machine.

　　Fourth, the band sawing machineSystem requirements for the working environment CNC equipment generally requires a constant temperature environment. Special band sawing machine on construction siteThe manufacturer thinksOnly under constant temperature conditions can it be guaranteedband sawing machinedegree of precision and processing. Ordinary sawing machines have no specific requirements for room temperature, but a large number of practices have shown that when the room temperature is too high, the failure rate of the sawing machine system will greatly increase.