Use and Proportion Requirements of Cutting Fluid for Band Sawing Machine
Release time:
2010-10-29
The use of cutting fluid band sawing machine: 1. In order to prevent the cutting fluid from changing due to chemical action and reducing the function, use the cutting fluid solution of the band sawing machine. 2. Pipes and pumps should be thoroughly cleaned with metal cleaning agents and prepared with tap water and clean water without heating and other treatments. 3. Regularly check whether the cutting fluid is moldy, smelly, remove debris and iron filings, and replace the cutting fluid if necessary. Band sawing machine manufacturers price cutting fluid ratio requirements: No cutting fluid, or improper type of cutting fluid, ratio imbalance, will lead to premature wear of the saw blade teeth, serious will cause heat sawing machine parts and shorten the service life, thereby increasing production costs and reducing productivity. The proportion of cutting fluid is determined according to the mechanical properties, chemical composition and sawtooth material of the material. The recommend ratio is: 5% for easy-to-cut steel and 10-15% for high-strength steel.
The use of cutting fluid band sawing machine:
1. In order to prevent the cutting fluid from changing due to chemical action and reducing the function, use the cutting fluid solution of the band sawing machine.
2. Pipes and pumps should be thoroughly cleaned with metal cleaning agents and prepared with tap water and clean water without heating and other treatments.
3. Regularly check whether the cutting fluid is moldy, smelly, remove debris and iron filings, and replace the cutting fluid if necessary.
Band sawing machine manufacturers price cutting fluid ratio requirements:
No cutting fluid, or improper type of cutting fluid, ratio imbalance, will lead to premature wear of the saw blade teeth, serious will cause heat sawing machine parts and shorten the service life, thereby increasing production costs and reducing productivity. The proportion of cutting fluid is determined according to the mechanical properties, chemical composition and sawtooth material of the material. The recommend ratio is: 5% for easy-to-cut steel and 10-15% for high-strength steel.
Jiangsu Lichi SAW
Contact: Mr. Lu 86-13951311115
Telephone:86-513-85562688 86-513-85569902
E-mail:1793361753@qq.com
Website: www.jslcjc.com
Address: 350 Chenggang Road, Nantong City
Liyi SAW
Contact: Zhang Jianwei 86-13884380088
E-mail:liyisawco@gmail.com
Address: No. 539-19 Chenggang Road, Chongchuan District, Nantong City, Jiangsu Province
Jiangsu Sakoside
Contact: Wu Mingchun 86-15380568795
Telephone:86-513-85562688
E-mail:jsscdsksd@163.com
Website: www.jsksd.com
Address: 539-19 Chenggang Road, Nantong City
Website QR code