Causes of deviation of sawing accuracy
Release time:
2013-02-20
The saw blade clamped 1. the guide angle of the guide arm of the sawing machine is not perpendicular to the table of the sawing machine: Solution: Install the saw blade and adjust the bolt of the saw guide angle to make the saw blade perpendicular to the work surface. 2. the band saw blade may be loose, tighten the saw blade. 3. band saw blade is likely to wear: Solution: If the saw blade has repair value, it can be repaired. If not, replace the saw blade. 4. the band sawing machine blanking speed feed is too fast, adjust the speed control valve to make the feed speed slower. 5. the distance between the two guide arms of the sawing machine is too large, adjust the distance of the guide arm, generally 6-10cm larger than the material 6. the small bearing of the sawing machine may be damaged in the guide angle of the sawing machine, just replace the small bearing!
The saw blade clamped 1. the guide angle of the guide arm of the sawing machine is not perpendicular to the table of the sawing machine:
Solution: Install the saw blade and adjust the bolt of the saw guide angle to make the saw blade perpendicular to the work surface.
2. the band saw blade may be loose, tighten the saw blade.
3. band saw blade is likely to wear:
Solution: If the saw blade has repair value, it can be repaired. If not, replace the saw blade.
4. the band sawing machine blanking speed feed is too fast, adjust the speed control valve to make the feed speed slower.
5. the distance between the two guide arms of the sawing machine is too large, adjust the distance of the guide arm, generally 6-10cm larger than the material
6. the small bearing of the sawing machine may be damaged in the guide angle of the sawing machine, just replace the small bearing!
Jiangsu Lichi SAW
Contact: Mr. Lu 86-13951311115
Telephone:86-513-85562688 86-513-85569902
E-mail:1793361753@qq.com
Website: www.jslcjc.com
Address: 350 Chenggang Road, Nantong City
Liyi SAW
Contact: Zhang Jianwei 86-13884380088
E-mail:liyisawco@gmail.com
Address: No. 539-19 Chenggang Road, Chongchuan District, Nantong City, Jiangsu Province
Jiangsu Sakoside
Contact: Wu Mingchun 86-15380568795
Telephone:86-513-85562688
E-mail:jsscdsksd@163.com
Website: www.jsksd.com
Address: 539-19 Chenggang Road, Nantong City
Website QR code